Tripp Lite's SMX3000XLRT2U Intelligent, Uninterruptible Power

SMX3000XLRT2U (SM8807)

Intelligent, line interactive rack/tower uninterruptible power supply

§ 3kVA / 3000VA / 2250W line interactive 2Urack/tower UPS; Sine wave output

§ 230V nominal output during brownouts to 158Vand over voltages to 278V

§ Add optional WEBCARDLX with latest version of PADM20 for IP-based Auto Probe feature

§ Extended runtime options up to 1600W

§ Detailed status LEDs; 3 switched output load banks

§ C20 inlet; 8 C13 & 1 C19 outlets; Includes 3 C13 to C14 cables

Overview

Tripp Lite's SMX3000XLRT2U intelligent, line interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only two rack spaces (2U) in a standard rack enclosure. Large internal batteries offer 10 minutes half load runtime and 3.3 minutes at full load. Runtime is expandable with optional BP48V24-2U or BP48V60RT-3U external battery packs. Maintains regulated 230V nominal output without using battery power during brownouts and over voltages from 158 to 278V. 3000VA/2250-wattpower handling capability and full-time since wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic applications. Includes a total of 9 outlets with 3 load banks that are individually switchable via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes Power Alert UPS monitoring and unattended shutdown software with complete cabling. Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD and RELAYIOCARD. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme.

Features

§ SMX3000XLRT2U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and over voltages, plus network-grade AC surge suppression

§ 3000VA/2250-watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices

§ Supports 2U rackmount installation in 4 post equipment racks, 2 post rackmount installation requires 2POSTRMKITWM, upright tower installation requires 2-9USTAND accessory

§ Large internal batteries support a half load of 1500VA for 10 minutes and a full load of 3000VA for 3.3 minutes

§ Runtime is further expandable with the addition of external battery packs BP48V24-2U (limit 1), BP48V60RT-3U(multi-pack compatible) and BP48V27-2US (multi-pack compatible)

§ Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)

§ Intelligent battery management system extends battery life

§ Maintains regulated 230V nominal output during brownouts and over voltages from 158 to 278V

§ Includes 9 UPS supported outlets arranged in3 individually controllable load banks (2 outlets per bank) that can be powered off and back on again via software interface

§ IEC320-C20 input connection accepts a variety of detachable cord sets to match country or site-specific wall receptacles

§  Power Alert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, email notification, event logging and running user-defined script commands.

§ Offers simultaneous monitoring through included USB and DB9 interface ports, or the monitoring by any number of additional servers over IP with included Power Alert monitoring software.

§ Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored AC line voltage, DC battery voltage and remaining battery capacity

§ Emergency Power Off (EPO) interface withcable

§ Supports timed inverter shutoff afterunattended shutdown, activate self-test and UPS output power control fordelayed or immediate reboot of connected devices

§ Supports Tripp Lite's WatchDog softwareapplication to restore operation to locked equipment through soft reboot ofapplication, OS or hard power off/on reboot of connected equipment - ideal forunattended kiosk applications (requires optional WATCHDOGSW)

§ Built-in accessory slot supports SNMP withoptional SNMPWEBCARD adapter

§ Optional WEBCARDLX (sold separately) withthe latest version of PowerAlert Device Manager firmware (PADM20) providesenhanced remote management capabilities

§ PADM20 and PowerAlert Element Manager (PAEM)form a powerful tool for expanding maintenance functions in largeinstallations, including firmware update checks and backup and restoration ofdevice configurations

§ IP-based Auto Probe detects lostconnectivity and restores service autonomously

§ Emergency Power Off (EPO) interface withcable

§ Multi-function audible alarms and set of 5front panel LEDs

§ Network-grade AC surge suppression

§ Attractive all-black color scheme

§ Optional PDUBHV20 bypass PDU enableshot-swappable UPS replacement with no disruption to connected equipment

§ UPS battery set ships fully assembled, notime consuming connection of internal batteries by user is necessary

PackageIncludes

§ SMX3000XLRT2U UPS System

§ PowerAlert software with USB and DB9 cables

§ Mounting hardware for 4 post rackmountapplications

§ Cable for Emergency Power Off interface

§ Instruction manual with warranty information

Specifications

OVERVIEW

UPC Code

037332120502

UPS Type

Line-Interactive

INPUT

Rated input current (Maximum Load)

15A

Nominal Input Voltage(s) Supported

230V AC

UPS Input Connection Type

C20 inlet

UPS Input Connection Description

User supplies input cabling with C19 output connection

Input Circuit Breakers

20A

Input Phase

Single-Phase

OUTPUT

Output Volt Amp Capacity (VA)

3000

Output Capacity (kVA)

3

Output Watt Capacity (Watts)

2250

Output kW Capacity (kW)

2.25

Output Capacity Details

Output is reduced to 1600W maximum when used with external battery packs

Power Factor  

0.75

Nominal Voltage Details

230v nominal inverter output voltage

Frequency Compatibility

50 / 60 Hz

Frequency Compatibility Details

Automatic frequency selection

Output Voltage Regulation (Line Mode)

230V (-15%, +6% )

Output Voltage Regulation (Battery Mode)

+/- 5%

Included Output Power Cables

Includes 3 C13 to C14 output power cables

Load Management Receptacles  

Three switchable two-outlet C13 load banks

Output Circuit Breakers

10A (x2) - each breaker protects 4 C13 outlets, C19 outlet does not include a breaker

Output AC Waveform (AC Mode)

Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

Nominal Output Voltage(s) Supported

230V

Output Receptacles

(8) C13; (1) C19

Individually Controllable Load Banks  

Yes

BATTERY

Battery Type

Valve Regulated Lead Acid (VRLA)

Full Load Runtime (min.)  

3.35 min. (2250w)

Half Load Runtime (min.)  

10 min. (1125w)

Expandable Battery Runtime

Extended runtime supported via optional external battery packs

Expandable Runtime

Yes

External Battery Pack Compatibility  

 BP48V24-2U  (limit 1);  BP48V60RT-3U  (multi-pack compatible);  BP48V27-2US  (multi-pack compatible)

DC System Voltage (VDC)

48

Battery Recharge Rate (Included Batteries)

Less than 4.5 hours from 10% to 90% (typical, full load discharge)

Battery Access

Front panel battery access door

Internal UPS Replacement Battery Cartridge

 RBC94-2U 

Battery Replacement Description

Hot-swappable, user replaceable batteries

VOLTAGE REGULATION

Voltage Regulation Description

Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 158 to 278

Overvoltage Correction  

Input voltages between 244 and 278 are reduced by 12%

Undervoltage Correction  

Input voltages between 182 and 206 are boosted by 12%

Severe Undervoltage Correction

Input voltages between 158 and 182 are boosted by 24%

USER INTERFACE, ALERTS & CONTROLS

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation; Rear dip-switch for charger rate adjustment

Alarm Cancel Operation

Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status

Audible Alarm

Audible alarm indicates power-failure, overload and low-battery conditions

LED Indicators

5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status

SURGE / NOISE SUPPRESSION

UPS AC Suppression Joule Rating

480

UPS AC Suppression Response Time

Instantaneous

EMI / RFI AC Noise Suppression  

Yes

PHYSICAL

Primary Form Factor

Rackmount

Rack Height

2U

Cooling Method

Fan

Included Mounting Accessory Description

Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm)

Installation Form Factors Supported with Included Accessories

4 post 19 inch rackmount

Installation Form Factors Supported with Optional Accessories

2 post rackmount ( 2POSTRMKITWM ); 2-4 post front rail rackmount ( UPSHDEARKIT ); 4 post rackmount short-depth ( 4POSTRAILKITWM ); Tower ( 2-9USTAND ); Wallmount ( 2POSTRMKITWM )

Minimum Required Rack Depth with External Battery Pack (cm)

66

Minimum Required Rack Depth with External Battery Pack (in.)

26

Minimum Required Rack Depth without External Battery Pack (cm)

57

Minimum Required Rack Depth without External Battery Pack (in.)

22.5

Optional Mounting Accessory Notes

Optional  2-9USTAND  enables upright tower UPS placement;  2POSTRMKITWM  enables wall-mount and 2-post rackmount installation;  4POSTRAILKITWM  enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm);  UPSHDEARKIT  enables installation in 2 or 4-post racks using front vertical rails only, without rear support

Primary UPS Depth (mm)

483

Primary UPS Height (mm)

89

Primary UPS Width (mm)

445

Shipping Dimensions (hwd / in.)

9.00 x 23.75 x 20.25

Shipping Weight (lbs.)

72.60

UPS Housing Material

Steel

UPS Power Module Dimensions (hwd, in.)

3.5 x 17.5 x 19

UPS Power Module Weight (kg)

29.03

UPS Power Module Weight (lbs.)

64

ENVIRONMENTAL

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity

0 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)  

236.6

AC Mode Efficiency Rating (100% Load)

97%

Audible Noise

45 dBA maximum, front side 1m

COMMUNICATIONS

Network Monitoring Port Description

Supports detailed monitoring of UPS and site powe.r conditions; 1 USB port and 1 DB9 serial port.

PowerAlert Software

Included

Communications Cable

USB and DB9 cabling included

WatchDog Compatibility

Supports Watchdog application, OS and hard-reboot restart options for remote applications

Network Management Card Description

Network management card optional

Communications Interface

DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface; USB (HID enabled)

LINE / BATTERY TRANSFER

Transfer Time  

4 ms (AC to Battery); 2 ms (Battery to AC) typical

Low Voltage Transfer to Battery Power (Setpoint)

151

High Voltage Transfer to Battery Power (Setpoint)

282

FEATURES & SPECIFICATIONS

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features  

Auto Probe Monitoring and Reboot (requires WEBCARDLX); Automatic Voltage Regulation (AVR); Expandable battery backup; Hot swappable batteries; Remote management; Sine wave output; Surge/noise protection

Green Energy-Saving Features

Greater than 95% efficiency - GREEN UPS; Individually controllable load banks

Grounding Lug

Back panel grounding lug

STANDARDS & COMPLIANCE

Product Compliance

RoHS; CE (Europe); FCC Part 15 Class A (USA)

WARRANTY

Product Warranty Period

Final Sale – As Is no warranty item

shipper pays freight